TO GO FILTER REPLACEMENT REFILLS — TWIN PACK
Replacement filter media for the Water Made Pure To Go stainless-steel infuser. Each refill treats up to 250 litres of potable tap water, providing a total treatment capacity of up to 500 litres.
IMPORTANT: This product contains replacement filter media only. The stainless-steel infuser, water bottle and other items shown in example photographs are not included.
WHAT YOU RECEIVE
- Two individually packaged 45 g filter-media refills
- Each refill contains prepared conductive activated carbon and natural calcite mineral stone
- Printed preparation, use and care instructions
Total filter-media weight: 90 g
Total treatment capacity: up to 500 litres
MATERIALS
The refill media contains only prepared conductive activated carbon and natural calcite mineral stone. It contains no plastic cartridge, plastic housing or disposable plastic filter components.
The filter media is prepared, rinsed, inspected and packaged by Water Made Pure on Salt Spring Island, British Columbia.
COMPATIBILITY
These refills are made specifically for the Water Made Pure To Go stainless-steel infuser, measuring approximately 1.5 inches in diameter by 2.75 inches long.
The stainless-steel infuser is included with the complete To Go Water Filter but is not included with this replacement twin pack.
HOW IT WORKS
The stainless-steel infuser holds the conductive activated carbon and calcite media inside your reusable water bottle. Extended contact allows the media to interact naturally with the water.
The conductive activated carbon improves taste and reduces chlorine-related taste and odour. The natural calcite slowly adds minerals and supports balanced alkalinity. Extended contact also lowers the water's oxidation-reduction potential (ORP).
These refills are intended for potable tap water. They do not make microbiologically unsafe water safe to drink.
CAPACITY
- Two 45 g replacement refills
- Each refill treats up to 250 litres of potable tap water
- Total twin-pack capacity: up to 500 litres
- Typical replacement interval: approximately three to four months per refill, depending on water use and water quality
HOW TO PREPARE A REFILL
- Unscrew and empty the stainless-steel infuser.
- Wash and rinse the empty infuser thoroughly.
- Open one 45 g refill package.
- Place all the media from the package into the infuser.
- Securely replace the infuser cap.
- Rinse the filled infuser under running water to remove loose carbon fines.
- Place the infuser in a clean reusable water bottle and fill the bottle with potable tap water.
- Allow at least 20 minutes for noticeable taste improvement. Longer contact provides greater interaction with the conductive activated carbon and mineral stone.
CARE AND MAINTENANCE
- Keep the bottle and stainless-steel infuser clean.
- Rinse the filled infuser if loose carbon fines or sediment accumulate.
- Periodically boil the stainless-steel infuser and media in clean water for three minutes. Allow everything to cool before returning the infuser to the cleaned bottle.
- Replace the media after approximately 250 litres or three to four months of typical use.
- Do not combine new refill media with exhausted media.
- Use one complete refill package at a time.
Plastic-free filter media. Reusable during its service life. Prepared and packaged in Canada.
